How to hydro dip a tumbler with film?

If you want to dip a tumbler with a protective film, you will need to do a little bit of planning. Tumblers are small and have intricate shapes, making them harder to dip with a solution. For a successful hydro dip, the bowl should be around two to three inches wide. Put the tumbler in a mold that will allow you to hold the bowl at an angle for an easy dip. If you don’t have a mold, use a large plastic tub

How to hydro dip a beer glass with film?

Naturally, you will want to dip your glassware in the tumbler bath, then use a stick to remove the film and place on top. This will give your glassware a nice glossy appearance while keeping it safe from scratches.

How to hydro dip a tumbler with resin?

If you want to add a glossy drop to your tumbler, you can dip it with a resin solution. Add a small amount of resin to a bucket of water and then add the tumbler so that it’s completely covered. You don’t want to add too much water as this could affect the color of your tumbler. Leave the tumbler in the solution for about an hour and then wash it off.

How to hydro dip a glass mug with film?

The glass mug is one of the easiest objects to hydro dip because it's small and easy to hold. You can dip a mug with a handle or by setting it in a pot of water. To dip a tumbler, insert the mug into the sleeve, fill it with water, add the hydro dip solution, and seal the lid. Let the tumbler hydro dip for about 20 seconds to one minute. Unscrew the lid, remove the mug, and let the excess water drain

How to hydro dip a glass tumbler with film?

Using a hydro dip tumbler and film is not as simple as just pouring some water into the tumbler and dipping it in, unfortunately. If you want to do this correctly and have high-quality results, you need to do a little bit of prep work beforehand. First, make sure you have a clean glass tumbler that can hold water. You will need to wash the outside of the glass to remove any dust or dirt. Carefully scrub the inside to remove any wax or