How to hydro dip shoes with film?

Let’s start with the easy part: the actual process. Shoe hydro- dipping is similar to auto paint and bodywork. (If you don’t believe us, then watch this video from the guys at AutoDipShoes.com.) To dip a pair of shoes, start by removing the shoelaces, then soak the shoes in a bucket of water for about an hour. Once the shoes are fully saturated, place them on a drying rack and let them

How to hydro dip shoes with epoxy resin?

The chemical reaction between the epoxy resin and the metal allows the bonds to form a tighter fit and prevent corrosion. Thus, manufacturers use epoxy resin to dip the shoes to prevent rust. The epoxy resin stays on the shoes for about two weeks and hardens when it fully dries.

How to hydro dip black shoes with film?

Additives are used to help shoes resist water absorption, therefore they should have a glossy finish when dry. We recommend using a high quality wax or sealant to prevent the shoes from getting that dull look after hydro dipping.

How to hydro dip shoes with resin?

To hydro dip shoes with resin, you will need a bucket of water, a plastic container of silica gel or silica sand (also known as sandstone), and a water-resistant film. Silica gel absorbs moisture. So keep your bucket of water in the refrigerator before you start. When you place your shoes in the bucket, add enough water to cover them and then add silica gel. Let the shoes sit in the silica gel for a few hours. This will create a barrier

How to hydro dip shoes with plastic?

You can hydro dip shoes with plastic in a “tub dip” machine. Find a local shop that can supply your shoes and you can dip them in a bathtub full of plastic. You can dip them in up to five hours. Plastic shoes are great for outdoor activities like hiking or riding a horse. They can help protect the shoes and the feet from moisture, dirt, and debris.