How to light a pilot light on a Hotpoint gas stove?

If your kitchen faucet won’t turn on after you turn the gas on, your gas stove’s pilot light may not be lighting up. First, try turning the gas knob to the off position if the problem persists. If this doesn’t fix the problem, you’ll need to check the gas stove’s pilot light. Sometimes, the gas stove’s pilot light can be very difficult to see, especially if the stove is in a dark

How to light a pilot light on a Hotpoint gas stove with remote?

The first thing you need to do is find the location of the gas valve. Since the control panel is usually located on the front of the range, you can find the gas valve just above it, usually on the left hand side. The gas valve should have two or three small holes running down the middle of it. You will need to loosen the screw or knob that holds the gas valve in place to gain access to the inside of the gas valve. Once you have the screw loose, you can

How to light a pilot light on

The first thing you need to do is make sure the gas is turned on at the source. If it is not, the gas will not flow to the appliance and the pilot light will not ignite. If you suspect the gas is not flowing properly, you should call the gas company to inspect the lines. If the gas is flowing properly but the pilot light won’t ignite, it’s possible the gas stove is damaged. Try turning the stove off and then back on again. If

How to light a pilot on a Hotpoint gas stove?

The pilot light on a Hotpoint gas stove is located under the burners. Turn the dial on the stove to the PILOT position to light the gas. The red glow under the burners will tell you that the gas is on. The pilot light will automatically ignite when the oven is turned on.

How to light a pilot light on a Hotpoint gas stove with oven?

If your model has an oven burner, but it seems to be sealed and won't light, try removing it. Sometimes the burner isn’t properly sealed, so you need to replace it. You can still light the stove without the burner. To do so, push down on the gas valve and wait for a few seconds. You should hear a click and a whoosh sound. If that doesn’t work, try pressing your gas stove’s reset button.