How to light a pilot light on a water heater?

The first step in lighting a gas water heater’s pilot light is to turn the gas valve to the on position. If there is no visible gas coming out of the valve, turn it back to the off position. You can also try hitting the gas switch or flicking the switch a few times. If the gas remains off, check the gas connection on the water heater. It could be cracked or damaged. Contact a professional to check it out and fix it.

How to turn on a pilot light on a gas water heater?

If you have a gas water heater with a pilot light, there should be a red or yellow “start” button on the unit. This button is used to ignite the gas and start the water heater. If the water heater is not producing hot water, press the “start” button repeatedly until you hear a “click” sound. If you do not hear the click sound, press the “start” button while you are holding down the “ reset

How to turn a pilot light on water heater?

The first thing you need to do is locate the hot water heater’s pilot light. This is a small metal burner located at the bottom of the water heater. This burner is controlled by the water heater’s gas supply. Once the pilot light is lit, the gas will heat up the water heater to the temperature required to heat the water. A red or blue light will indicate when the water heater’s gas burner is on. If the burner is not lit, then the

How to light pilot on gas water heater?

The gas water heater has a gas valve on it which is turned on after the gas is ignited. If the gas valve is not turned on properly, the gas will not travel to the burner. Turn the gas valve clockwise to light the pilot light. You may need to turn the gas valve more than 90 degrees to see the flame. If the gas valve is not turning, it could be because the gas pipe is blocked. Check this immediately to prevent a gas leak and the following safety hazards.

How to light pilot light on gas water heater?

Once the gas water heater is turned on, there will be a pilot gas burner. The pilot light will ignite the burner if the gas is present. The burner burns continuously to heat the water until the supply of gas is cut off. While the burner is on, there will be a small amount of gas that will continually flow through the burner which will keep the water hot. Once the gas is cut off, the burner will extinguish itself. The water will continue to heat as long as there is