How to light pilot light on propane wall heater?

If you are using a wall mounted propane heater, press and hold the power button for 2 seconds to turn it on. Once the unit is on, press and hold the pilot light switch for 10 seconds. If you are using a floor model propane heater, you will need to press the power button five times and hold it in while pressing the pilot light switch. Once the heater's lights turn on, the heater is ready to go.

How to light pilot back on propane wall heater?

If the pilot light on your wall furnace won’t light back on, first check whether the gas supply valve to the furnace is in the on position. If the gas is not flowing, you must first turn off the furnace and wait for the gas pressure to drop. If the gas supply valve is in the on position but the pilot light still won’t light, the gas pressure is not enough. You can check the gas pressure in your home by using a gas pressure gauge. You

How to light pilot on propane heater?

If you experience the issue of the pilot light not being lit, then the culprit could be the flicker switch. Flicker switches are often found on older wall heaters and can be very difficult to replace. If you have one of these older units you will need to hold down the switch with one hand and hit it repeatedly with a small object. You may also need to tap the switch a few times with a small rubber mallet. Try this a few times until you hear the click of the

How to light pilot on propane wall heater?

First, press and hold the control knob down for a few seconds until the pilot light appears. If the light flickers on and off, it could be because the ignitor is failing or needs to be replaced. There may be an indicator on the wall heater that tells you if the pilot light is lit. If there is no light, you can confirm it is working by using a flashlight or by turning on the lights in the room.

How to light pilot light on propane wall heater?

Here is the simple instruction on how to light the pilot light on a propane wall heater. If you don’t know whether your heater has a pilot light, look for the small red or blue flame on the burner. If you can’t see it, it probably means that the pilot light is out. To check if the pilot light is on, press the power switch to see if you hear the burner click on. If you hear it, it means that the heater is ready