How to light the pilot light on a valor gas fireplace?

You may have already figured out that the gas fireplace does not have a matchbox tucked into it. Instead, you use a gas lighter to ignite the pilot light. The pilot light is located on the burner tube. There are a number of ways to access it. In older gas fireplaces, the burner tube may have a screw-shaped cap that allows you to turn the gas valve. You may need to hold the lighter underneath the screw or hold the gas valve down to ignite the gas.

How to light pilot on a valor fireplace?

Using the right fireplace tools helps you ensure a successful light. You can purchase these tools online or at hardware stores. Some tools will look like a spark plug and others will look like a wrench. A fireplace tool with a screwdriver attachment will be very helpful. This enables you to screw into the gas valve in the fireplace and turn it to the off position. This prevents any gas from escaping when you try to light it. If you don’t have a screwdriver attachment, simply use a

How to light pilot light on a valor coal gas fireplace?

In order to light the pilot light on a valor gas fireplace, you will need to remove the glass doors (if any) on the fireplace. Once the glass doors are removed, you should be able to see the valve. You will need to loosen the nut that holds the valve in place and turn the valve clockwise. Doing this will allow air to reach the burner. Once the burner is lit, you can return the glass doors to their original position.

How to light pilot on a valor gas fireplace?

The pilot light on a valor gas fireplace is a small, tapered flame that burns slowly to heat up the fireplace when the fireplace is not in use. The pilot light is usually located on the front wall of the fireplace. If you can’t locate the pilot light, use your fireplace poker to locate the small hole in the brick where the pilot light should be.

How to light pilot on a valor furnace?

The pilot light on a valor gas fireplace is located on the front of the fireplace, behind the burner. After you have the fireplace assembled, see if you can locate a small hole in the back wall of the fireplace. This is where the gas burner “pilot” will be installed. A pilot light is a small flame that is used to ignite a larger flame when the fireplace is first turned on. The gas burner will automatically turn on when the thermostat is set to heat