How to make a door jamb wider?

To make a door jamb wider, you need to add wood to the jambs, either by adding pieces of wood to the sides or by adding a new section of jamb. Adding wood to the sides is the simplest and fastest way to make a door jamb wider and will add strength to the jamb. However, adding a new section of the jamb will create a new fitting, requiring you to create a new door. If you plan to do this anyway, you will want to

How to make door jam wider?

Door jamming is very common in older homes, because the woodworkers who built them never anticipated that you might want to expand the width of your door. So, the jam that the door hinges on is often not wide enough to accommodate a door with an increased width. This means that you need to either get new door jambs or reface the existing door jam, which is where the problem often begins. Not only are the door jambs very thick, but they also have the door-fitting

How to make a door wider without changing the door frame?

You don’t need to buy a new door frame to make your door wider. You can make the door jamb wider by adding trim on either side. The key to a successful door jamb expansion project is to make sure the finished product matches existing trim and moldings. That means the same type of wood, the same type of hardware and the same style all the way around. You don’t want to simply attach a new strip of wood to the existing door jamb —

How to make a door frame wider without changing door size?

If you want to make a door frame wider without making the door bigger, you can try adding jambs to either side. This adds a small amount of framing to each door and can be accomplished by adding a strip of wood to each jamb. This can be done with simple wood molding or even with existing molding that matches the existing trim. This can also be done by replacing the existing jambs with ones that have been cut to size, although this should only be done by a professional

How to make a door frame wider?

It’s very common for door jambs to be cut an inch or two too short when the carpenters doing the installation decides to shim under the door. This means that the door does not fit flush with the jambs and you end up with gaps all the way around. If you want to make a door frame wider, you’ll need to either replace the jambs or shim under them. To do this properly, you’ll need to know how to