How to make quilt binding with mitered corners?

If you don’t want to use a double-fold binding, you can also make quilt bindings with mitered corners. To do this, you’ll need to cut three strips of fabric a little longer than the quilt you are binding and add a mitered angle to the end of each strip. Use the same method to turn the corners of the quilt, then press the binding in place.

How to make mitered quilt binding?

The simple way is to cut strips of fabric long enough to go around the quilt plus a little extra. Then, fold the strips in half lengthwise, matching the raw edges. Align one of the corners and sew it. Repeat for the other three corners, making sure to match the seams. To create a mitered corner, turn the strips so that the front edges are flush and the long edges are at an angle. Align the front corners, press, and sew.

How to make quilt binding with square corners?

The process of making quilt bindings with square corners is pretty similar to the process for making bindings with mitered corners, but instead of folding the corners to match the angle of your blocks, they’re cut in a square. You can cut these corners with a pair of scissors or an accurate rotary cutter. If you’re using a saw, you can cut the corners with a jigsaw.

How to make quilt binding with diagonal corners?

There are a few ways to create diagonal corners on your quilt binding. You can use strips that are cut on an angle, or you can add strips of fabric to the sides of your finished quilt. If you're using a standard ruler or straight ruler, you can cut the strips at an angle by laying a ruler on your quilt and then stretching the ruler slightly. Use your ruler's mitered corners to mark the corners of your quilt as you lay out your strips. If

How to make quilt binding with curved corners?

Even though it’s not traditional, you can make a quilt binding with a curved corner. All you need is a circle template and some fabric. Cut six strips of fabric that are approximately twice the width of your quilt. Sew the strips together in a ring. Use your circle template to mark where the seams should line up. Trim the corners and press. Sew the fabric together to form a circle, and then press the seams open.