How to make resin molds shiny?

The most common process to make resin mold shiny is sandblasting. Sandblasting is a process in which sand, which is basically silica powder, is sprayed at an angle towards the surface of your mold. This creates a roughened surface, which gives the surface a metallic appearance.

How to make glossy resin molds?

The aesthetic quality of a resin mold is reliant on its surface shine. If the surface is not glossy enough, it will appear dull. In some cases, the glossy resin mold can be polished but it will still not have the same look as a mold made with glossy resin. If you want to make resin molds that look good, glossy resin is the best option.

How to make resin molds shiny metal?

To do this, heat the mold over a gas burner to warm it up. When it’s warm enough, dip it into a bucket of baking soda to coat the inside of the mold. Use your fingers to rub the baking soda into the ridges and corners to make sure it soaks into the mold. You want to get into all the little nooks and crannies so that the plastic mold coating will stick there. When the baking soda is all in, let the mold cool

How to make a shiny resin mold?

The first thing you can do is to add a few drops of alcohol to the resin, usually about three. Alcohol helps to reduce the surface tension of the resin so it will have less of a tendency to form small bubbles. Silicone mold coatings are also added to mold surfaces to prevent the resin from sticking. Silicone mold coatings also keep the molding material from drying out, making it easier to remove the mold from the molding surface.

How to make shiny resin molds?

It is quite challenging to get resin molds shiny. The molding material is usually quite glossy, and that would make the resulting product have a glossy surface as well. This is not very appealing to most molders. However, you can make resin mold shiny using a little effort. There are several ways to do this, and the best way is to pay attention to what you are molding and the molding process itself.