How to make UV resin shiny?

To make resin glossy you need to use a topcoat. You can either buy a glossy resin topcoat from a chemical supply or make one yourself. Silicone is a popular option as it comes in a plastic jar or tube and is easy to apply. Silicone resin can be glossy when cured or silky when wet.

Silicone resin takes longer to cure than epoxy resin, so you’ll need to wait at least 24 hours before applying the topcoat.

After curing, your

How to make resin shine?

The UV resin will not shine without being cured. This process also helps to deep-clean the surface of the stone, removing any dust, grease and other contaminants. The resin will help the stone look glossy and will not be absorbed into the stone — it will stay on top. To make resin shine, you can use a chemical solution or a special shine stone. I generally don’t recommend using the chemical method, because the stone may be damaged or discolored.

How to make UV resin shiny without sanding?

If you’re looking for a quick and easy way to make UV resin glossy without sanding, you can use a piece of plastic tubing as a mold. Simply hold the tube over the resin, let it sit for a few minutes, then give it a gentle tap. The resin will start to take on the shape of the tube, leaving you with a glossy surface.

How to get resin shiny without sanding?

If you want to make UV resin shine without sanding, you can use a commercial polish (this is usually a UV-proof silicone). Silicone is expensive, but you can buy a few ounces and keep it in a small jar. Apply the polish to your resin, wait a few minutes, then buff it off. Doing this on a clean surface will ensure you don’t have to worry about smudges.

How to make resin shiny without sanding?

If you want to make resin shiny without sanding, you can use a chemical called “polyflor” (or other similar products). This chemical is usually very easy to find at any hardware store. Just be careful to only use this chemical on resin that is completely cured; otherwise, you could damage the plastic.