How to make wire jewelry with beads?

You can make gorgeous beaded jewelry by stringing together a variety of findings, such as pearls, crystals, and gemstones. To do so, you’ll need jewelry findings, such as jump rings, ear wires, crimp-on connectors, and findings for adding beads, such as jump rings, clasps, lobster clasps, and toggle or lock-back findings. Explore your local craft stores for a great selection of findings.

How to make wire jewelry with beads and loops?

There are two ways to make wire jewelry with a beaded charm: adding the bead to the end of a piece of wire, or adding the bead to a loop already created on the wire. Adding the bead to the end of a piece of wire is the easiest method and gives you more control over the length of the piece. For adding the bead to a pre-made loop, you will need a larger wire that is long enough to add a bead. You can find this type of wire at

How to make wire jewelry with beads and wire wraps?

If you want to add some sparkle to your jewelry, you can make it by using wire beads. These are smooth metal beads that are attached to center wires. You have the option of either making your own wire beads or buying them pre-made. If you decide to make your own, you can buy your own metal stock or use craft wire. The thickness of the wire you use will determine the size of the beads you make. While the smaller the wire, the smaller the beads will be

How to make wire jewelry with beads and wire?

The possibilities for how you can make your own jewelry with wire and beads are endless! Besides the many different ways to combine the two materials, there are also a few techniques you can use to add a little more detail to your jewelry making. For example, if you want to add a little sparkle to a simple strand of beads, you can use bead-wrapping wire. Simply wrap a piece of beading wire around the outside of each bead with a dab of epoxy, and then add a

How to make wire jewelry with beads and wire bends?

To make a bezel necklace, you’ll need three pieces: two long pieces of wire and four jump rings. You’ll want to cut the longer pieces of wire to length. You’ll want to make sure to mark the length on the wire so you don’t accidentally cut off your ends when you’re finished.