How to measure bolt pattern on trailer hub?

The bolt pattern on the hub is similar to the bolt pattern on the front differential housing. If you have a ton of aftermarket wheels available to you, you can use the bolt pattern of the wheels to determine whether your stock bolt pattern will fit. If not, you’ll need to find a hub that has the exact bolt pattern you want. Before you buy a new hub, make sure there isn’t one available at your local hardware store that will fit your existing wheels. If

How to measure bolt pattern on a trailer?

The bolt pattern refers to the distance between two holes on a part, like how many threads fit between two nuts. If there are three nuts, and the distance between the center nut and the two nuts on the corners is 5 threads, then the bolt pattern is 5 threads. The same applies to any flat surface. Measure the distance between two nuts and any other flat surface, and take that number as the bolt pattern.

How to measure bolt pattern on a trailer wheel?

As stated earlier, the bolt pattern on the hub of a trailer is the same or similar to the bolt pattern of your car’s wheels. However, you can sometimes find aftermarket wheels with different bolt patterns. If the bolt pattern on your car is different from that of the new wheels you want to buy, you will have to check the bolt pattern on the hub. If the bolt pattern on the hub is different, it will not fit on the new wheels.

How to measure hub bolt pattern?

Depending on the vehicle, the bolt pattern can be either inside or outside. A good way to ensure the hub has the right bolt pattern is to hold the hub in a vertical position. Measure the distance between the holes and make sure the bolt diameter matches the holes in your new bolts. If the holes are too small, you’ll have to replace the hub. If they’re too big, you’ll have to shim the bolt to make the fit snug.

How to easily measure bolt pattern?

Do you have a tape measure handy? Using a tape measure, measure the distance between the centers of the two holes each way on your aftermarket wheels. If the measurements are the same, then the bolt pattern is even. If the hole centers differ by more than a couple of millimeters, you may want to try a different aftermarket wheel.