How to measure windows for blinds with measuring tape?

You need to know the width, length and height of the windows you want to cover with blinds Measure the windows from inside the room where you want to place blinds, and make sure to measure each window separately. Always use a tape measure that is at least two inches longer than the window to allow for expansion. You can also use a tape measure to check the window’s depth.

How to measure window for blinds?

The first step for window blinds installation is window blinds size measurements. Use a tape measure to mark the window blinds on the wall where the blinds will be installed. Next, measure the width from where the blinds will meet on the wall and the length of the blinds from the wall to the roller. Keep in mind the blinds will overlap slightly on the wall to account for the trim and the blinds will also be tucked under the slats.

How to measure windows for blinds without measuring tape?

If you don’t have a tape measure, no worries! There are plenty of other options available to you. A piece of paper, a ruler or even a shoebox can all be great tools for this job. The goal is to get the measurements you need to correctly size your blinds, so don’t be afraid to make a few estimates.

How to calculate blinds for windows?

First, you need to make sure your windows are the right size for the blinds you want to install. Measure the length of your windows from the top of the sills to the top of the window frame on each side. Write these measurements down. Then add the width of the window and ceiling molding to each measurement. Add the total of all the window measurements to determine the overall blind size you need.

How to measure blinds for windows?

First place the blinds against the wall and mark the top and bottom on the wall. Then, measure the distance between the marks and add the height of the blinds to get the total window height. Now, measure the distance between the window and the ceiling. Add the blinds to the window height to get the window shade height. Finally, measure the width of the window shade and use that as the blinds width.