How to open a PS4 pro to clean the fan?

The fan of the playstation 4 is one of its most important parts, since it is responsible for cooling the hardware and the internal components. For this reason, it is essential to frequently clean the fan, so that it operates properly. The fan is connected to the console via the motherboard, so you will need to open the system to be able to clean it.

How to clean a PSpro fan?

First of all, if your ps4 is still under warranty, you should contact Sony support. They will be able to see if there is a fault with the system and if it is covered. If your PS4 is not covered, then you will need to clean the fan yourself.

How to clean the fan in PSpro?

After the fan is cooled down, you can clean it by turning it off and using a can of compressed air. It’s best to use a can specifically designed for computers. In general, you should work around the fan for 30 seconds to clean it properly. If you have a can of air, simply attach it to the fan and spin it. Then, press the power button while still holding down the button on the can. Make sure not to hold the power button down too long to

How to open PSpro to clean fan?

The PlayStation 4 pro has a powerful fan which keeps the console cool. In order to clean the fan, you will need to open the console to do so. Firstly, you need to press the power button and keep holding the power button for 10 seconds. Then, press the eject button on the front of the console. If you are unable to do it, you can press the button on your controller. Now, you will see the blue light flashing. When you see the blue light blinking, pull

How to open PSpro to clean the fan?

Before opening the system, remember to put away all the small items such as remote, memory card, power cable, charger, headphones, etc. Then press the power button and move the power slider to the off position. Now press and hold the power button and press the eject button at the same time. Now you can see the system, press and hold the power button again and press the eject button. Now remove the power supply and the disc drive. Now press the power button again. Now remove