How to open PS4 slim to clean dust?

If you are experiencing low-performance issues, dust buildup on your playstation 4’s slim console might be the culprit. Dust is a natural by-product of the manufacturing process and can accumulate in hard to reach areas. The good news is that it’s fairly easy to clean the inside of your PlayStation 4. Here are the steps:

How to clean dust from PSslim?

If you recently purchased a new ps4 you may have noticed a thin film of dust on the console’s exterior. You may have also noticed that dust is more noticeable when the system is in use, making the dust that much more noticeable. If you notice the presence of dust on your PlayStation, you may want to clean it off. Here are some ways you can clean dust from your PS4 slim.

How to open PSslim to clean dust white?

If you haven’t cleaned the dust on your PlayStation 4 Slim since its release, you’re missing out on the experience of a dust-free console! To clean the dust on your PlayStation 4 Slim, first, you need to make sure the console is off. Then, take off the bottom panel of the console and carefully pull it off. Now, you need to remove the fan. After you do this, you can take off the outer housing to access the hard drive and the power

How to open PSto clean dust?

Before you start cleaning the inside of the PlayStation 4, we recommend turning it off and disconnecting it from the power source. Both the PlayStation 4 and the power strips have small buttons, so press both of the buttons simultaneously until the power turns off completely. Now you can begin detaching all the unnecessary accessories — like the power cords, Ethernet cable, and HDMI cable, among others — from the system. After all of the attached items have been detached, you can start cleaning the inside of the PlayStation

How to open PSwithout dust?

Firstly, press and hold the power button for 10 seconds to shut down the system completely. Disconnect the power cable and wait for the system to completely turn off. After that, press the power button to turn off the system again. Now, remove the power supply unit (PSU). After that, remove the system memory (RAM). Now, remove the system board. Now, remove the tiny screws securing the top cover. Remove the screws securing the bottom cover. After that, flip the system