How to paint baseboards and door trim?

When it comes to paint ng baseboards and door trim, you have two options: you can sand and paint them, or you can use a special tape or coating to protect them from scuffs, scratches and stains. If you choose to use tape or a coatings, you can either apply them yourself or have a professional do it for you. If you decide to go this route, you’ll need to first clean the surfaces to remove any dust or grease. You’ll also want

How to paint baseboards and door trim in house?

One of the most common areas of a house that is often neglected is the baseboard trim and the door trim. When you first walk into a house, these areas can give an outdated and feeling of the home. If these areas are looking dull, shabby and old, it will soon show through in the rest of the house. To get the job done right, you will need the help of a professional painter who will be able to give these areas a facelift.

How to paint baseboards and door trim in a room?

When painting baseboards and door trim, start by removing any tape or caulk that was used to seal them from moisture. If the trim is unfinished, sand it before painting with a power sanding machine. Use sandpaper with a fine-grit to remove any splinters or rough spots. If the trim is finished, use a sanding sponge to knock off any excess paint that has collected on the surface.

How to paint a wall of door trim and baseboards?

When you’re painting baseboards and door trim, always start by wetting the area with a wet towel so the wood can absorb the paint. Use a paintbrush to apply the paint to all surfaces. You can then use a foam roller to get a smooth, even coat on the wood. Let the paint dry completely before applying any other coats.

How to paint door trim and baseboards?

One of the easiest ways to refresh door trim and baseboards is to simply paint them. You can paint them with either water-based or oil-based paint. Oil-based paints are best for doors because they are more durable and water-resistant. If you have wood door trim and baseboards, first sand the surfaces with sandpaper. Then, use a primer to prepare the surfaces for painting.