How to paint baseboards and trim?

One of the most common questions I hear when it comes to painting baseboards and trim is how to paint them. Fortunately, the process is pretty simple. The key is to start by sanding the surface of the baseboard and trim to remove any dust, paint, or grease that could prevent the paint from adhering to the wood. Use sanding pads to sand the wood until it’s smooth and then apply a coat of primer to the surface. When the primer is dry,

How to paint baseboard and crown molding?

When it comes to painting baseboards you have two options: you can paint them with a finish coat or you can do a baseboard fill. The first option is typically the more expensive option because you’ll need to sand the baseboards first so the paint can properly adhere to the wood. When you do a baseboard fill, you don’t have to sand the baseboards and instead can just paint them directly onto the wood.

How to paint primer baseboard and trim?

After sanding and cleaning, you may need to apply a primer to prevent the wood from absorbing too much moisture. The primer shrinks the wood fibers and makes them easier to paint. When painting baseboard and trim, use a high-quality primer and apply it with a roller on the edges, corners, and inside of the panel. You may need to use a brightener so your baseboard and trim will have a glossy finish. Once the primer is dry, sand it again to create a

How to paint baseboards and trim before painting?

The best way to prepare your walls for painting is to sand them off completely. If the walls are old and stained, use a disc sander to get rid of any peeling or flaking paint. Use 220-grit sandpaper to sand the walls and then wipe them down with a wet cloth. Let the walls dry completely. If you don’t have access to a power sander or wet cloth, use a sanding block to sand the walls yourself.

How to paint trim before painting?

Before painting baseboard trim, sand and clean the wood with a damp cloth. Remove any debris or old paint from the edges, but don’t sand the wood too much or it will become a problem when you apply the primer. Use the same method for moldings, door casings, and any other pieces of trim.