How to polish aluminum motorcycle parts?

You need to use the correct type of aluminum motorcycle polish. Aluminum polish is formulated differently depending on whether it’s for metal, plastic, or glass. If you don’t use the correct aluminum motorcycle polish, you will end up with a very glossy finish that’s much harder to remove. Aluminum motorcycle polish is also usually thinner than wax and it works better on aluminum than on plastic.

How to polish aluminum wheel?

The best way to clean and polish aluminum motorcycle wheel is by using a wet and dry method. Start by soaking the wheel in a bucket of soapy water for about 15 minutes. Allow the wheel to air dry. Once it’s completely dry, apply some protective wax to the surface and buff it with a soft cloth.

How to polish aluminum gas tank?

One of the major components on your motorcycle’s fuel tank is the aluminum finish. Over time, the finish will become scratched or damaged, making it look worn and dull. Aluminum gas tanks are relatively easy to polish. If you have never polished aluminum before, it is a good idea to start with a small project. It won’t take long for you to learn the techniques needed to clean and polish the tank properly. In order to safely polish the gas tank, you will need to

How to polish aluminum throttle?

If you own an aluminum motorcycle, it’s likely that one of the most-used parts of your bike is your throttle, so it’s important to keep it in good condition. Aluminum throttle bodies are very easy to get dinged up, so the best way to prevent corrosion and rust is to regularly give them a good polish, using the right tools and techniques. The key to a good aluminum throttle polish is consistency; you don’t want to over-polish your

How to polish aluminum rear shocks?

Aluminum shocks are made from a single piece of tubing, so they’re extremely difficult to maintain. An aluminum shock will suffer from corrosion when it’s exposed to the elements, and a good way to fix this is to give it a quick wipe-down with a rag and some machine oil. After that, use a soft cloth to polish the metal to a shine. If you want to go the extra mile, you can use a pad and some aluminum polish on the shock shaft.