How to properly measure a window for blinds?

As mentioned earlier, window blinds are available in a variety of styles, sizes, and materials. To ensure the perfect fit for your windows, you need to know the actual measurements of your windows. Measure the width of your window at its highest point and the length from the left side to right side at the bottom. Use a tape measure and mark the measurements on the window frame with a pen or pencil. In most cases, you will need to allow a margin of 1-2 inches for the

How to properly size a window for blinds?

When it comes to window blinds the size of the window is just one component of the equation. There are several other factors to consider as well, such as the type of window blinds and whether you want the blinds to be on both sides of the window, for example.

How to measure the width of a window for blinds?

To measure the width of a window for blinds, you will need a tape measure and a level. First, lay the tape measure on the floor against the wall next to the window and mark the location of the window’s jambs. Measure the distance between the two marks and add an additional 1/2 inch for the thickness of the window frame. This will be the total width of the blinds in this area.

How to measure the height of a window for blinds?

The blinds you purchase should be the right height for your windows. To figure out the right height, measure the window frame at the highest point (usually at the top where the sash meets the casings) and add an extra two inches. Use a tape measure and a level to make sure your blinds are plumb. Keep in mind that the amount of shade a window blind provides is also dependent on the blind’s length.

How to measure the size of a window for blinds?

First, measure the width and length of the window at its widest and deepest points, respectively. You can also measure the distance from the sash to the wall at each end of the window. Using the information gathered so far, you can determine the blinds size needed for your windows.