How to put on a zipper pull with a fork

How to put on a zipper pull with a fork?

If you struggle with zipper , a small but helpful trick can help you to master the zipper pull-on method. Using a fork, place the tines on either side of the zipper pull and use the handle of the fork to pull the zipper pull towards you.

The tines should be able to grip the metal edge of the zipper pull. Once you have the zipper pull lined up, pull it back onto the zipper.

How to put on a zipper pull with a fork and water and bread?

If you like to add bread to your soup or stew, you’ll be glad to hear that you can also add bread to your zipper pull! First cut off the end of a piece of bread, then place it on a flat surface and put a thick metal cooking fork through the middle of the bread to create a hole. Make sure the hole is big enough to fit around your zipper pull. Thread the other end of the bread through the hole, then pull the bread tightly around the zipper pull

How to put on a zipper pull with a fork

The first step is to use a sharp kitchen knife to cut off the excess zipper pull material. Next, use your pliers to bend the prongs of the fork back so that they lie flat. Finally, slip the zipper pull onto the pliers and press it down until you hear the click. Now you can pull the zipper back through the hole!

How to put a zipper pull on with a fork?

If you find it difficult to do the zipper pull with a fork, you can also use a toothpick. First, stick the toothpick into the loom of the zipper pull and then hook the teeth into the hole. Squeeze the two sides of the zipper pull together around the toothpick until it’s secure. You can also use a small pliers to make sure the pull is secure.

How to put on a zipper pull with a fork and water?

Water is often the bane of our lives when it comes to finding a solution for anything. The thought of using a fork to thread a zipper pull through the hole is one that seems a little odd at first. But if you try it, you will definitely not be disappointed. The zipper pull gets easier to thread the further you go, and as long as you don’t overdo it, you will be able to do this without any problems. Try it and you will soon see how