How to read a dial caliper in thousands?

A dial caliper is a specialized type of length gauge used by craftsmen and tradesmen in the construction industry. It has a dial that tells the user the current length of the measured object. The dial consists of a gnomon or vertical index pointing towards the ground. The unit of measure is the number of thousands of the actual length. For example, a dial caliper reading “0.820” means the measured object is 8.20 mm long (0.820 mm per thousand

How to read a dial caliper in milimeters?

In millimeters a dial “milimeter” is equivalent to one thousandth of a meter. If you have a dial caliper that reads in milimeters, you can use it to measure a piece of wood that’s one meter long. If the diameter of the piece is two inches, you’ll measure that diameter in millimeters using your dial caliper.

How to read a dial caliper in points?

One of the most difficult things to understand about dial calipers is that the reading is in points, not inches or millimeters. Don’t let this throw you off! All you need to know is that a one-point reading equals 1/1000 of an inch. A dial caliper with a one-point reading will measure out to 0.001 inches.

How to read a dial caliper in inches?

When reading a dial caliper in inches, make sure to turn the dial so that the index point is toward you. The reading should be displayed on the dial at this point. The reading will be shown in inches, so if you have a dial caliper that reads in centimeters, you will need to do a conversion. Go to the conversion section of this article to learn how to convert a reading in centimeters to inches.

How to read a dial caliper in centimeters?

The dial caliper in centimeters is rather easy to read. Firstly, you need to match the distance between the numbers to the actual measurement. If the distance between the numbers is too small, it will be difficult to match the numbers to the correct length, which will cause you to make mistakes when converting.