How to read a vernier caliper imperial?

The four digits of a vernier caliper imperial are measured in hundredths This means that when you measure something the first digit will indicate the whole number of the measurement plus the number of hundredths it is away from an exact number. For example, if you measure something that is 39.9 from an exact number, the first digit will show 40.

How to read a vernier caliper imperial mm?

If you are reading a vernier caliper in millimeters you will see a red arrow pointing to it on the dial. At the end of the arrow, you will find the red line with the “m” label on it. The reading is the value of the mark on the end of the arrow. The mark on the end of the arrow is located where the first division of the millimeters is written.

How to read a vernier caliper imperial inch?

First, you need to find the place where the two ends of the vernier are, one on the body of the caliper and one on the inner jaw. Using a fine metal file, gently grind away the black coating on the end of the vernier until you can see the color of the shank. The beginning of the shank is the zero setting.

How to read a caliper imperial inch?

One of the most intimidating things about a vernier caliper is figuring out how to read the numbers on the dial. Fortunately, it’s quite easy. The scale of the vernier is represented by a fraction, so you just need to make sure that the number you see on the dial is in the fraction. If you’re using a column vernier, add the numbers for the two sides together to find the total reading. For a dial vernier,

How to read a caliper imperial?

In order to read a caliper imperial, you must first locate the vernier. To do this, turn the caliper so that the vernier faces you. The vernier will be on the bottom of the caliper, toward the left. It will be located close to the end of the dial. If you are looking at the front of the dial, the vernier will be closest to the first gradation line.