How to regroup a shower pan?

All shower pans are not created equal. There are many different shower pans available today. Some are made from plastic, some from concrete, some from ceramic and some from metal. Each material has a different strength and when combined with the weight of water, the result can be a cracked, warped or dislodged shower pan. If your shower floor is sagging or bowed, it is often a good idea to regroup your shower pan. Some shower pans can be regrouped by applying drywall

How to regroup a shower pan without removing the shower?

If you don’t want to remove the drain you can regroup a shower pan without removing the drain by using a U-shaped gasket around the drain. The gasket should be slightly bigger than the opening in the drain. The gasket will create a seal when placed around the drain, creating a waterproof barrier. After installing the gasket, you can use silicone caulk to seal up any small gaps.

How to regroup a shower pan without removing the seal?

The most likely reasons for shower pans gapping are that the seal is extremely loose or broken. Sometimes, the seal is dislodged when the shower is cleaned and never replaced. To regroup a shower pan without removing the seal, you’ll need to find a small piece of thin plastic, such as a credit card. Slip the plastic under the seal and press it against the pan until it’s in place. You may need to wiggle the seal a little to get it

How to regroup a shower pan without removing the ring?

If the ring isn’t too tight, you might be able to regroup the shower pan without removing it. To do so, fill the empty part of the pan with water to about a quarter-inch below the existing level. Use a plastic cup to create a small pool of water in your new shower pan. Once the water level is equalized, add a few drops of dish soap and stir gently to create a slick surface. Apply gentle pressure to the ring until it’s

How to regroup a shower pan without replacing the ring?

If your shower drain is corroded and you don’t have the tools to regroup the drain without replacing the ring, there’s an easy fix that only requires a few parts. First, you’ll need a new P-trap flange (if your existing flange is damaged, you’ll need a new flange, too). Then, you’ll need to cut a new drain hole in your shower pan. You’ll want to use