How to relight pilot light on majestic gas fireplace?

You can listen to the sound of the gas burner and then locate the pilot light. It is usually located at the bottom of the fireplace. If it is not visible, you can use a flashlight to locate it. While holding the lighter in your hand, aim towards the pilot light and then press the lighter’s ignition button to ignite it. Once the flame appears, you can turn it off by pressing the off button.

How to relight pilot light on majestic gas fireplace remote control?

If you are using a remote control to ignite your gas fireplace press the ignition button and hold it for a few seconds. The fireplace will ignite automatically, and the gas will flow to the burners. If the fireplace does not light, first make sure the power is on. If the fireplace flicker’s off repeatedly, it’s possible the remote control is broken. Check the batteries. You can also try pressing the off button a couple of times to see if the fireplace turns

How to relight mantel pilot on majestic gas fireplace?

If the gas fireplace is connected to your home gas supply, press the reset button located beneath the fireplace until the flashing blue lights stop flashing. This will restart the gas fireplace and ignite the flames, hopefully, without the need of a chimney repair. If the flashing blue lights do not turn off, the gas fireplace will not light. To reset the gas fireplace, press and hold the reset button for approximately 5 seconds.

How to relight pilot on majestic gas log fireplace?

If the pilot light on your majestic gas fireplace won’t light after a period of time, it is most likely due to a lack of fuel. You can check to see if the gas is getting to the fireplace by watching to see if the flames turn blue. If so, the gas is getting there. Try removing the cover over the burner and poking a small hole in the back of it with a screwdriver. This will allow air to get to the gas. Once you have the gas

How to relight pilot on original majestic gas fireplace?

If the pilot light on your majestic gas fireplace won’t light, first check that the burner is properly connected. Connect the gas burner according to the manufacturer’s instructions. If the burner is not connected properly, it will not ignite. If the gas burner is properly connected, but the pilot light won’t light, it could be because the pilot light is dirty. Scrub the burner and the burner flange with a soft, damp cloth to clean it off. Replace the