How to remove bath drain cap?

One of the most common problems that you may encounter while owning a bathtub is a clogged bath drain. To fix a clogged bath drain, you need to locate the drain cap at the end of your bathtub. Once you locate the drain cap, remove the cap by turning it counter clockwise. Once you loosen the drain cap, turn the cap slightly to the right and pull out the U-shaped clamp. If you find that there is still a slight resistance when you pull the clamp

How to remove a bath drain stopper?

If you are unable to remove the drain cover due to corrosion, then you will need to replace the drain. A plumber can easily remove the drain plug and install a new one. Replace the drain plug and your bathroom drain should be ready to use.

How to remove bath drain stopper cap?

First, locate your bathtub drain, and identify the drain cap. It often has a metal lid covering the drain. Using pliers, place a wrench around the drain cap and turn it clockwise. If the drain is clogged, you may need to have the drain unclogged to be able to remove the cap. If your drain is not clogged, you can continue to loosen the cap with the pliers.

How to remove bath drain stopper without removing the wax seal?

Before you plunge your drain into the tub, take the time to remove the bath drain cap. With a little bit of effort, you can usually push the cap off using a rubber mallet. If this doesn’t work, try twisting the cap counter-clockwise (if the cap is on the left of the drain) or clockwise (if the cap is on the right). If that doesn’t work, try shimming the drain.

How to remove bath drain stopper?

First, you need to turn off the water supply. Then, you need to look for the metal drain cover. Sometimes it is attached to the drain pipe or under the sink. Use your fingers to feel around the drain or the drain cover to locate it. Once you locate the drain cover, attach an inexpensive wrench to it. If the drain cover is attached to the drain pipe, use a flexible pipe wrench. If it is under the sink, use a small adjustable wrench. Tighten the wrench