How to remove bath drain plug?

Here are a few ways to remove a bath drain plug. First, try turning the drain screw counterclockwise to loosen the plug. If that doesn’t work, try applying a thin coat of lubricant to the drain screw. This will help it turn smoothly. If you’re unable to loosen the drain plug, you’ll need to call a professional to have it removed. A plumber can either loosen it from the inside or cut the drain pipe away from the plug

How to unplug bath drain?

The first thing you need to do is locate the drain plug and loosen it enough to remove it. If you have a deep sink, this can be a little challenging, especially with your hands. Fortunately, there are several tools that can make this job much easier. Using a long, sturdy screwdriver and a wrench, loosen the drain plug and remove it from the drain. If you find the drain plug is tightly stuck, you can use pliers to break the drain seal. After you remove the

How to remove a bath drain stopper?

You can unscrew the drain plug with a specialized tool. This tool is also known as a bath plug remover. Use it to loosen the drain plug. Use care and keep your hand away from the drain as you do this. A hand that gets pinched is not good for your health! Once you have the plug loose, you can pull it out. If you don’t have a bath drain plug remover, you can use a pair of pliers to grab the plug. Again

How to remove bath drain stopper?

There are two basic methods to remove bath drain plug: Screw off or pop off. Screw off is the easiest way and most people can easily do it. Just place a drain plug removing tool hole over the drain plug and turn it counterclockwise until it detaches from the drain hole. If it is not easy to loosen the drain plug, your drain hole may be clogged. To clear the clog, you can try plunging a hair straightener in the drain to dislodge the cl

How to unclog bath drain?

First, turn off the water supply and try to dislodge the drain plug from its seat. You can do this by applying pressure with a screwdriver. If it does not budge, you can try using a special tool that helps you lock and remove the plug.