How to remove broken tub drain assembly?

First, turn off the water supply. If you have a drain pipe that extends up into the attic, be sure to turn it off as well. This can prevent water from backing up into the ceiling and the walls of your house. You also could backflow into your sump pump or sewage line and cause damage to your home. If your drain pipe is located under the floor, then you will need to access it from underneath. To do this, turn your sump under the drain hole and

How to remove stuck tub drain?

If the tub drain is still stuck after you have tried all the above methods, do not panic! If you have a powerful suction, you can pull it out using a hand auger. If your drain is very tight, you may need to use a snake or plumber’s snake to free it. You can also try to dislodge the tub drain by hitting it against the wall. If it dislodges but gets stuck again, then you will need to heat the drain up with

How to remove broken tub drain assembly without damaging the tub?

The first thing you need to do is assess the tub to see if it is worth repairing. If the tub is heavily damaged, it is best to replace it rather than repair it. However, if the tub is still serviceable, you will need to remove the broken tub drain assembly to do the repair. This will allow you to work on the drain without interfering with the tub. The next step is to turn off the water supply line. If you do not have a shutoff valve for the

How to fix broken tub drain?

It's best to call a professional plumber to repair your broken tub drain assembly. A plumber has the necessary tools and knowledge to complete the job in a timely manner. If you attempt to repair the broken tub drain yourself, you could end up making the problem worse or causing damage to the tub or plumbing system.

How to unclog broken tub drain?

First, turn off the water line near the broken drain. If you can’t locate where the water line is connected, look for a hose clamp or a metal clamp (depending on the make of your tub) that’s holding down the drain pipe. This clamp should be on the drain line inside your wall (it might be covered by the floor or wall shingles). Unscrew the clamp, and wiggle the pipe a bit to free it up. You should be