How to remove cement under tile floor?

There are several ways to remove cement under tile floors, such as manually breaking it up with a hammer and chisel, using a chemical removal agent, or using a special extraction tool. But before you use any of these methods to remove the cement, you need to know that the cement is bonded to the underneath of the tile floor. The flooring tiles are usually attached to a concrete slab, so if your floor is made from concrete, you need to know whether the cement is attached to the concrete

How to remove thick cement under vinyl floor?

If you have a vinyl floor and noticed a thick, grey cement under it, this cement can be pretty unsightly and may require removal. Fortunately, removal is much easier than the installation process. You can do this yourself in a few days, and the results will be completely remarkable. First, use a small hand auger to loosen the cement around the edges of the floor. This will allow the tile to shift free. Then, use a wet vacuum to extract the excess water that is

How to remove the thick layer of cement under vinyl floor?

If you are unaware of what to do about a thick layer of cement under your vinyl floor, the best thing you can do is hire a professional to perform the removal process. This is because removing the thick cement under vinyl floor doesn’t only require advanced equipment and techniques but also the right protective gear.

How to remove thick cement tiles from vinyl floor?

The removal of thick cement tiles can be quite a challenge as they are usually quite heavy and can crack the vinyl tiles. If you are using a diamond saw, be very careful not to damage the tiles and the floor underneath as they are typically very expensive. If you are using a hand-held tool, be very careful to not damage the tiles and the floor as well. If you are trying to remove the tiles with a chemical solution, you should know that this can weaken the adhesive and the tiles

How to remove thick cement floor tiles?

The thickest cement floor tiles are usually 5″ thick. If you have this type of flooring and you want to remove it, you will need to first cut it out with a circular saw or a diamond saw. This will create a hole that allows you to access the concrete under the tiles. You will then need to use a vacuum cleaner to remove the debris and the dust that had collected under the tiles. If the concrete is still attached to the tiles, you will need to scrape the remaining