How to remove old bathtub drain assembly?

If you are looking to replace the bathtub drain, you will need to remove the old one. Before you do this, you should first cover the drain with a protective cover to prevent anything from getting lodged inside it. Then, turn off the water supply at the main faucet. You will need to hold the drain in place while you loosen the nuts that connect the drain to the tub. Doing this will allow you to loosen the seal that keeps water from bubbling out

How to uninstall old bathtub drain assembly?

You can disconnect the drain hose by unscrewing or twisting it. However, if you are unable to loosen the connection, it is best to call a professional plumber to do it for you. To remove the drain assembly, you need to hold the drain line with one hand and slowly turn the nut. It can twist off if you don’t have a good grip on it. Once the nut is off, you can pull the old tub drain out.

How to change bathtub drain assembly replacement?

If the drain cover is tightly fitted, you can try to loosen it by using a screwdriver. However, you must keep in mind that the drain cover is under high stress, so don’t overdo it. If the drain cover is loose, it’s best to call a professional plumber. They can inspect the drain cover and replace it the right way.

How to replace old bathtub drain assembly?

To remove the old bathtub drain assembly, you need a screwdriver and the proper wrench. Begin by removing the nuts from the drain pipe to loosen the pipe. The key is to use a wrench that is long enough to reach the screw threads. If you do not have a long enough wrench, use pliers to turn the nuts. Once you have loosened the nuts, remove the old drain pipe and replace it with a new one. Finally, secure the nuts back onto the drain pipe.

How to change bathtub drain assembly?

There are two ways to change your bathtub drain assembly. One is to do it yourself and the other is to call for help. If you are not very handy, then you might want to call a professional plumber to do the job for you. If you have all the necessary tools, then you can do it yourself. You will need a wrench, plumber’s putty, special sealing tape, and PVC or PEX pipe. First, loosen the screws that hold down the