How to remove old tub drain flange?

Most homeowners have a couple of special tools for removing a tub drain flange But here is a video that shows you how to do it using only what you have around the house. Simply take off the cover of the drain, insert a drain auger into the drain hole, and remove the flange. The auger will cause the drain to spin in place, and you can remove the loose drain pipe flange with a pair of pliers. If the flange is extremely tight, you

How to remove old tub drain flange rubber?

Most of the time, the flange rubber is stuck to the tub drain pipe threads. If the flange is damaged, it will cause the drain pipe to bulge and leak. If you have a flange that is tightly attached to the drain pipe, you will need to cut it away at the threads. If the flange is loose, you can pull it off the drain pipe. If you are unable to do this, be very careful when trying to remove the flange with a screw

How to remove old tub drain flange without pulling up?

Before flange removal, make sure the tub drain is completely loose and can be detached easily. To accomplish this, pull the drain slightly to one side and at the same time push down using a pair of pliers. This might be difficult to do, especially if the old tub drain flange is overly attached to the drain pipe. If it is, you will need to loosen it further by using a screwdriver or a wrench to remove it.

How to remove old tub drain flange with a wrench?

You can use a wrench to remove the flange. First, locate the drain flange nut and loosen it by turning it counterclockwise. Then, take off the flange using wrenches. Always remember to keep the drain flange and tub off the ground to avoid any injury. You can also lubricate the flange with some lubricant before removing it. This will help prevent the flange from getting stuck down.

How to remove old rubber tub drain flange?

If the rubber tub drain flange is still in place, it can be very easy to remove it. All you need is some plumber’s putty, epoxy sealant, or lubricant to provide a good seal around the threads. Once the flange is removed, it’s best to replace it with a new one made of metal or plastic. Replacing it will ensure that the threads won’t get damaged again.