How to remove toilet flange from concrete floor?

To remove toilet flange from concrete floor, you may use a concrete floor removal machine. It’s a powerful device with a rotating drum that safely removes old concrete and asphalt from the floor. The high-pressure water from the machine dislodges the concrete-encapsulated toilet flange. Once you get the concrete-encapsulated toilet flange out, you can dismantle the drain pipe and remove any corrosion or damage from the pipe threads.

How to remove flange from concrete floor?

The concrete floor near the toilet is susceptible to damage because of the weight of the toilet and the frequent movement of the flange. To prevent damage to the concrete, you need to remove the flange from the concrete floor after the toilet is removed. To do this, you need to chisel the concrete away from the flange until the flange is visible. Use a diamond chisel or a combination of a diamond chisel and a hammer to chisel the concrete away. After the flange

How to remove toilet flange without concrete?

To remove flange from concrete floor, you need to cut the surrounding concrete. This will expose the flange to the surrounding area so that the corroding flange becomes visible. In this case, you will need to scrape off the rust and paint the flange. This will remove the flange from the concrete floor. If the flange is corrosion-free, you will be able to reuse it.

How to remove toilet flange from ground?

To remove the toilet flange from the ground, first determine the location of the flange. The flange is usually under the toilet and the floor. If you cannot find the flange mark the location of the drain pipe to get an idea of the location of the flange. To remove the flange from the ground, use a flat bar and a hammer to hit the flange. But be careful not to hit the drain pipe. Do not apply too much force. You can use some

How to remove a toilet flange from concrete floor without breaking it?

If you don’t want to pull up the toilet flange with brute force, the best way is to cut it out. To do this you need a reciprocating saw with a diamond blade. This kind of saw is the best for this job because it allows you to make long, clean cuts. You can also use a circular saw to make a cut from all sides. Put the saw in line with the flange but keep it away from the wall. When you cut just above the