How to remove tub drain cap?
Your tub drain cap has a hexagonal recess, often with a screwdriver hole in it. Remove the screwdriver and insert a wrench into the hole. Turn the wrench clockwise to loosen the cap. It may take some force. Once it’s loose, pull up on the drain to remove it. If it’s difficult to pull, try turning the wrench slightly counterclockwise, which may allow it to break free. Remove the drain body, and then replace your tub drain
How to remove a tub drain valve?
The best way is to use a hand auger and remove the drain screen. If your tub drain has an auger nut as opposed to a screw, use a wrench to remove it. If you need to remove a tub drain cap because it is damaged or seized, you can try pouring boiling water down the drain. This will loosen the drain cap but it could cause a mess.
How to remove the tub drain cover?
First, locate your tub drain cover. It is usually attached to the tub with small screws. If you are unable to locate the screw, seek out the screws that attach to the flange. Once you locate the screws, loosen them enough to prevent them from turning further. Next, place a screwdriver underneath the drain cover. Using a prying motion, slowly lift the cover up and remove it from the tub drain.
How to open a hot tub drain?
If you have a spa that was installed by a plumber, you will have to turn the water supply off, loosen the drain cap, and then pull the drain plug to remove the tub drain. Sometimes, your hot tub drain will be covered by the spa’s air intake hose. You may need to remove this to gain access to the drain plug. If your spa has a glass drain, you can reach up inside to loosen the drain plug, but be careful not to get cut.
How to open tub drain cap?
To access the tub drain, first remove the drain cover. Your tub drain cap is installed at the very end of the drain pipe. The easiest way to remove it is to loosen it slightly with a pair of pliers. Then, slowly turn the drain cap counterclockwise to create a gap, allowing air to escape while keeping the water from pouring out. When you’re finished, replace the drain cover.