How to remove tub drain cover without screws?

If you want to quickly remove the drain cover, but don’t have any convenient tools, you can use a drain auger. This kitchen tool is available at any hardware store and can be used to loosen up the drain cover’s seal, allowing you to pull it off. To use a drain auger, position the drain auger around the drain cover’s seal, turning the auger to break the seal. Once the seal is broken, pull the drain cover off

How to remove tub drain cover without removing screws?

If you have a drain cover that is tightly fitted to your tub, you can be pretty certain that it is attached with screws Screws are very well known for being the most secure fasteners on any hardware, but they are also very difficult to remove. If you don’t have the right tools handy, you can easily break both the drain cover and the tub. Fortunately, there are some tools that can help you remove the tub drain cover without having to use screws.

How to remove kitchen drain cover without removing screws?

If you are unable to loosen the compression screw on the drain cover, then you can remove the cover by using a pair of pliers. To do this, you need to grab the lip of the drain cover, which is usually located around its outer edge. You will then need to pull the cover while applying a firm but gentle tug. If you pull too hard, you will snap the drain cover and perhaps even damage the threads. That is not what you want to happen. This procedure should be

How to remove kitchen sink drain cover without removing screws?

Screws are used to hold down the drain cover onto the kitchen sink drain, and, unfortunately, it is very difficult to remove these screws. To remove the drain cover without removing screws, you will need to use a plumber’s snake. A plumber’s snake is a tool that is used to remove clogs from the kitchen sink drain. To use a plumber’s snake, you will need to loosen the drain cover by turning the screw that is holding down

How to remove tub drain cover without unscrewing?

In this case if you want to remove the tub drain cover without using a screwdriver, you will need to know how to use a plumber’s snake. It is a thin metal or plastic tube with a corkscrew attached to the end. You will need to feed the snake through the drain pipe and carry it until it reaches the tub drain cover. When you reach the cover, you need to press down the other end of the snake so it pushes the cover towards the drain pipe