How to remove tub drain linkage assembly?

In order to remove the tub drain linkage, first loosen the nuts that secure the drain cover to the tub flange by turning them counterclockwise. When the nuts are loose, pull the drain cover away from the tub flange. Now, connect a flexible drain pipe to the drain pipe that connects to the drain cover. Then, secure the tub drain linkage to the drain pipe with a clamp. Finally, turn the nuts clockwise back to their original position to lock the drain cover to the fl

How to remove tub drain linkage?

First, turn the tub drain off by twisting the drain plug, and then turn the sink faucet to full open. By doing so, the water will drain from the tub. Now, locate the tub drain linkage at the tub drain inlet. It will be under the drain pipe. If you have a deep tub, you may need to prop up the drain pipe when looking underneath it. Finally, loosen the tub drain linkage nuts from the drain pipe and the tub drain inlet. Remove

How to change tub drain linkage assembly?

You need to turn the faucet to the off position and remove the handle. Then, you need to loosen the screws that hold the drain cover to the tub drain. After that, you need to pull out the drain cover and change the tub drain linkage assembly. Put the new one back in place and secure the cover. Finally, turn the faucet to the on position and test to see if the tub drain works properly.

How to replace tub drain linkage assembly?

The first thing you need to know is that this part is not easy to replace. It’s because it’s located at the very end of the tub spout, which means that you need to loosen the nuts that secure the drain pipe to the drain tub flange. You’ll have to find an appropriate wrench that will fit the nuts and keep them from unthreading. After you’ve done that, you can loosen the nuts and remove the drain pipe.

How to remove drain linkage for kitchen sink?

If you have a kitchen sink with a drain that will not loosen even after several plunges, it is possible the drain linkage is frozen in place. If this is the case, you will need to remove the drain linkage assembly from the tub drain. Removal is not difficult, and you can do it yourself in a few minutes. First, turn off the water supply to the tub. Then, locate the drain linkage assembly at the end of the tub drain pipe. Remove the ball nuts from each end