How to remove tub drain stopper assembly?
If the tub drain stopper is stopped up, it will cause a gradual slow drain. While water may still drain from tub faucets, this will be a trickle, rather than a normal pour. Often, this is simply caused by a buildup of soap scum or other debris. To clear the drain, you will need to first check to see if the drain pipe is clogged. If it is, you may be able to clear it with a snake or plunger. If that fails
How to remove tub stopper without tools?
Fortunately, you don’t need a lot of special tools to remove a bathtub drain stopper. If your drain is of the newer plastic variety, you might not need a tool at all! But if your drain is of the older type, you’ll need a wrench or plumber’s screwdriver, or even a pair of pliers, to remove it. If you need to remove a tub drain stopper to fix it or clean it, though, then you don
How to remove tub drain stopper?
First, turn off the water supply at the main valve. Look under the sink at the U-shaped drain trap and locate the tub drain. It’s usually located beneath the sink. The tub drain is where the water goes when you take a bath or shower. To remove the tub drain stopper, turn the screw clockwise to lift the drain out of the sink. It’s not uncommon for the tub drain to be extremely tight. If the drain is too tight, you
How to remove tub drain stopper with pliers?
Begin by removing the nuts on the threaded hose. Once the nuts are removed, you can separate the two pieces of the tub drain pipe with a pair of pliers. Then, put one end of the pliers over the lip of the drain hole and turn it slightly. This will cause the two parts to separate. Now, you can use a screwdriver to remove the drain cover. If you find it difficult to push the screwdriver from the drain hole, try twisting it a bit to break
How to remove tub drain stopper without removing the sink?
If you are unable to find the drain plug, then you will need to remove the sink drain. If your sink has a drain auger, it should be screwed in tightly. If it isn’t, you can loosen it by turning the tap. It should turn freely without making contact with the drain. After the sink drain is free, you can pull it out. Use a pair of pliers to remove the plug. Now, you can clean the tub drain using a commercial drain cleaner