How to remove vinyl tile floor from wood subfloor?

There are several methods for removing vinyl tile floor from wood subfloor. One method is sanding the floor to smooth out the wood and the vinyl to a level so that the tiles can be pulled off. You can sand the floor with either a hand-held or electric power sander, but the type of sander you will use will depend on the type of floor you have. For vinyl tile floors installed on concrete floors, use a drum sander, whereas flooring on plywood subflo

How to remove vinyl tiles floor from wood subfloor?

If you want to remove vinyl flooring from the subfloor, you’ll need to know the type of flooring you have first. Most vinyl tiles have a protective film on their surface. This means the tile itself isn’t flat, which can be challenging to remove. Sand the floor to level it first, then use a wet and dry vacuum to remove any dust bunnies and debris.

How to remove vinyl tile floor from wood

Depending on how long the vinyl floor has been in place, removing it might be a simple process, or it might be more complicated. To do this, you will need to begin with a thorough cleaning. Start by removing the accumulated dust and dirt from the floor with a broom. Then, use a vacuum to remove the remaining debris from the tiles and the subfloor. If you see any visible stains or smells, clean them with a cleaner and let the tiles dry completely before proceeding.

How to remove vinyl tiles from wood subfloor?

If you’re removing vinyl flooring from your wood floor, the first thing you will want to do is cover the floor with plastic. Wood floors are porous and when they get moisture underneath them, they can lead to damage to the wood and the vinyl. If your vinyl flooring is in good condition, you may be able to simply pull it up off the subfloor. If it has begun to tear or curl, you will need to use a flooring removal tool.

How to remove vinyl tile floor from concrete floor joints?

If you have a vinyl tile floor on concrete floor joints (also known as a floating floor), you’ll need to remove the flooring on the ends of the floor to expose the concrete. Remove the flooring from one end of the floor and use a pry bar to loosen the tiles from their attachment to the concrete. If the flooring is tightly adhered to the concrete, it may be necessary to use a flooring scraper to loosen the tiles from the edges of the floor