How to remove vinyl tile from concrete?

If you want save your vinyl tile floor from damage caused by dirt or moisture, you may want to try a method that does not involve removing the tile. There are chemical strips available that can be applied to the concrete floor where the vinyl tiles are installed, allowing the tiles to be lifted out when the floor is refinished.

How to remove vinyl flooring from concrete floors?

The key to removing vinyl flooring from concrete floors is using the right tools. For example, you can use a diamond saw to cut out the vinyl flooring and then scrape and sand the concrete underneath to level it. Once the concrete is flat and smooth, you can fill the void with new concrete, sand it down and refasten the vinyl flooring.

How to remove vinyl tile from concrete backer board?

If the vinyl tile is attached to the concrete with thinset, you will likely need to use a chemical removal agent to remove it. Some chemical removal agents can be used on their own with good results. Others require the use of a scrub brush to loosen the attached material. Do not use any chemical removal agents on porous concrete surfaces or stained concrete, as it will damage the surface.

How to remove vinyl flooring from concrete?

If you want to remove vinyl flooring from concrete, the first thing you will need to do is look at the flooring and determine if it is attached to the concrete surface or if it can be pulled up. If the flooring is attached to the concrete, you will need to cut out the flooring from the concrete around it. If the flooring isn’t attached to the concrete, you can use a pry or a pick to lift the vinyl flooring up.

How to remove vinyl tile from concrete floor?

When removing vinyl tile from concrete floors, it is best to use a diamond saw to cut the tile and a pry-bar to lift it up. You can then scrape the concrete from underneath to dislodge any particles that hold the tiles in place. Vacuum the floor and then use a floor scrubber to clean the concrete. If the vinyl tiles are cracked or torn, you can use a putty knife to fill the cracks and holes.