How to repair a toilet that doesn't flush well?

The flapper is the component in your toilet that seals off the water closet. The most common problem in toilets that don't flush well is a broken or dislodged flapper. Sometimes the flapper is just too loose, and it can be difficult to hear when it flushes. Other times the flapper is damaged, making it impossible for the water to be sealed off. If your flapper is functioning properly, the toilet will still drain water but slowly, and you will hear a g

How to fix a toilet flushing poorly?

If your toilet is still flushing fine but it still has that strange smell or sounds like water is trying to escape, it's possible that your toilet bowl is partially clogged. If the flapper or wax seal on your toilet is damaged, it may not seal well and cause water to leak slowly through. Try to locate the problem and determine if it is indeed clogging.

How to fix a toilet that flushes with a loud sound?

If your toilet makes a loud noise when you flush it, it could be because the flapper is broken. Check the flapper (the rubber or plastic flap that seals the outlet of the bowl when the toilet is flushed) and make sure it’s not snapped off or stuck in the down position. If that’s the case, you’ll need to replace it. Once you’ve replaced the flapper, make sure that it’s properly seated and that

How to fix a toilet flushing poorly water?

If you discover that when you flush your toilet the water does not drain completely, then the flapper or the fill valve could be the culprit. Flappers are the small, metal or plastic paddles that seal the toilet when the toilet is closed. If it becomes clogged, the water may fill the tank but not drain. Flappers are easy to replace and can be found at hardware stores or online. Replace the flapper with a new one and make sure it's properly seated. If the

How to fix a leaking toilet that flushes poorly?

If your toilet is making noise, and you don’t know why, and it’s not clogged, it could be a leaking toilet flange. The flange is the rubber gasket around the toilet’s drain pipe. Over time, these gaskets dry out and crack. If this is the case, you can replace the gasket. After removing the toilet’s drain pipe, remove the flange with a wrench, then replace the gasket.