How to replace toilet seat with hidden bolts?

Before you replace the toilet seat first, you need to remove the bolts that hold the seat in place. There are two bolts under the flange on the underside of the toilet that you need to loosen. You will need a wrench or pliers to do this. After removing the bolts, carefully lift the seat up to remove it from the toilet bowl. Be careful not to drop the seat or the nuts and bolts. Replace the toilet seat and bolts with the new one. In order to make

How to replace toilet seat without removing bolts?

This type of toilet seat is quite easy to replace with hidden bolts. To do this, you will need a small impact screwdriver and a small flat screwdriver. First, loosen the nuts on the bolts that hold the toilet seat to the bowl. Once the nuts are loose, remove them. Then, take the detachable toilet seat off the toilet bowl. It should be pretty easy. Once it is off, you can put the new toilet seat on the toilet bowl and hold it in place while

How to replace toilet seat with screws?

Screw-type seat attachment is a traditional method to secure a seat to the toilet bowl. To find the right hardware needed to secure the new toilet seat to the bowl, first measure the width of your existing toilet seat and the required width of the new toilet seat. If your existing toilet seat is narrower than the new one, you need to make the new seat wider to provide an adequate gap between it and the flange.

What to replace toilet seat without bolts?

There are some toilets which don’t use bolts for securing the toilet seat. These types of toilets come with a secure attachment system which ensures that the toilet seat stays in place. The most common secure attachment systems are suction and magnetic. Toilets with suction secure the toilet seat using suction cups placed in the four corners of the toilet bowl. The toilet seat is attached to the bowl by applying more suction in the corners if needed. This type of secure attachment system works best

How to change toilet seat without removing bolts?

To change the toilet seat without removing the bolts, you will need a tool to loosen the nuts. A screwdriver or wrench is all you need. You can purchase a tool at your hardware store, but if you don’t have one handy, you can improvise one. A socket wrench is a great tool to have around the house for other projects. Just take off the handle and place your toilet seat on a flat surface. Screw the handle onto the toilet seat’s bolt,