How to replace windshield wipers on 2020 Chevy equinox?

There are a few types of wiper blades that are suitable for your car. The most common are the standard blades, the blades that most car dealerships will sell you. If you want to purchase replacement blades, you can choose between clear or black blades. If you want to decide which type of blade will work best for your windshield, consider the amount of light your car gets and the UV rays exposure your car receives.

How to replace windshield wipers on Chevy equinox

The first thing you need to do is remove the wiper blades by pushing them down until they snap out of the sockets. After that, you can take out the old ones and replace them with the new ones. It might be a good idea to wear gloves and safety glasses while doing this to prevent any injuries.

How to replace windshield wipers Chevy equinox LT?

The first thing you need to do is to locate the wiper motor. You will find it under the hood, just below the power steering unit. If you have difficulty spotting it, use your car’s owner’s manual to locate the wiper motor. The manual will show you the best spot to access the wiper motor. After you have located the wiper motor, remove the two screws securing the plastic cover over the motor. Use a screwdriver to release the wiper

Replace windshield wipers on Chevy equin

The rubber wiper blades on your car are what allows you to clear your windshield of water and snow. If you notice that your wiper blades are torn or cracked, it’s time to get a new pair. Don’t try to cut a new wiper blade to fit your old ones—it’s definitely not a good look. And don’t use tape to repair your windshield wiper blades—you’ll likely end up with wiper marks on

How to replace windshield wipers on Chevy equinox LT?

The wiper blades on your Chevy equinox LT are located on the driver’s side and passenger side of the vehicle. Using a firm grasp, remove the wiper blade by carefully peeling it off the attachment screw. Once the blade is safely off, remove the screw, then remove the plastic wiper housing. Finally, remove the rubber wiper strip and replace it with a new wiper strip. The three steps should be done very carefully, as the plastic housing is very fragile