How to reset change oil light on 2010 dodge journey?

You will need to remove the dip stick that is on the engine to be able to check the oil level. Make sure you have a clean rag or towel handy. The dip stick is located near the bottom of the oil pan. Remove the drain plug and slowly let the oil drain out. Be careful not to spill any oil. When you have drained all the oil, replace the dip stick and reinstall the plug. The oil change light should now be off. If it is still flashing your

How to reset change oil light on dodge journey?

If your dodge journey is keeping you from getting where you want to be with your vehicle, then it is time to get it looked at. Your vehicle will run fine, but this oil light is sending mixed messages about the health of your engine. Your engine is in great shape, but the oil light is alerting you of a problem. This problem could be that your oil is dirty, or that you have a sensor that is not working properly.

How to reset change oil light on dodge journey?

Now, you must know that your car’s engine has a sensor called the oil pressure sensor and that the oil pressure light will alert you if the oil pressure is below the required level. It will give you an oil pressure alert signal when the oil pressure drops to less than 12 psi. This is to alert you that your engine oil is getting low and needs an immediate oil change. The light will also alert you if the oil is pressurized above 15 psi. If your oil pressure is between

How to reset change oil light on a dodge journey?

If you have a Dodge Journey, there is a chance a fuse or the signal to the oil light could be burned out. If this is the case, you will have to replace the fuse or the bulb. The wiring of the fuse is relatively simple, so replacing the fuse is a task anyone can do. If you are unsure of how to do this, you can always search the internet for a wiring diagram for your Dodge Journey for assistance.

How to reset the change oil light on a dodge journey?

If your Dodge Journey vehicle is giving you a “check engine” or “warning” light, it could be because you need to change the oil. If the oil light is flashing, it’s possible the oil is low. Also, if you hear a clicking noise when you try to start your Dodge Journey, it could be because your oil level is low. Or the oil light could be on because of a loose or disconnected sensor. If you suspect that the oil light