How to reset oil change light on 2014 dodge journey?

If the oil change light is flashing on your dashboard, it means you have a loose or broken oil dipstick. If the dipstick is loose or broken, you will need a new one. If you have a loose or broken dipstick, you will need to have this replaced before your car will be able to be safely driven.

How to reset my oil change light on a

If you are having difficulty reset ing your oil change light on your Dodge Journey, you can try these easy steps. First, inspect your car’s wiring harness. Look for any corroded or damaged wires or connectors. If any of the wires are damaged, replace them. If you find wires that are corroded, disconnect them. After you have inspected the wiring harness, remove the odometer and place it back on. Turn the key to the On position and press the reset button while holding

How to reset oil change light on a dodge journey

If the oil change light is blinking on your Dodge Journey, it means the oil is almost out and you need to get a new oil change soon. If your Dodge Journey is not in a position to have the oil changed, you should keep driving until you can. However, the moment you notice the oil change light blinking on your Dodge Journey, you should immediately bring it to a certified service center. A certified service center can diagnose your Dodge Journey oil change light problem and fix it for you. Once

How to reset my oil change light on my dodge journey

If you've recently purchased a new Dodge Journey, you may have noticed that your vehicle won't start if the oil change light is on. It's possible that the light is flashing because your car's oil needs to be changed. If you suspect this is the issue, you'll want to reset the oil change light on your Dodge journey. To do so, all you need to do is press and hold the "trunk release" button while turning the key to the off position. That should reset your

How to reset the oil change light on a dodge journey?

First, locate the small dip on the dip stick. If the dip stick is not very visible, move it back and forth to make it visible. If you still cannot see it, you will need to remove the dip stick to see if it is covered in oil and is therefore blocking the light. If it is covered in oil, you will need to clean it off. Then, put the dip stick back into the dip stick hole and spin it a few times to see if the light comes back