How to reset oil change light on ford transit UK?

If your Ford Transit’s oil change light is on, it means that your oil has been changed. If you want to reset the oil change light, you need to press the reset button located on your service door’s panel. Once you press it, the light will turn off. Your Ford Transit will now need to be refilled with the proper amount of oil.

How to reset oil change light on ford transit

Ford Transit oil change light is located at the lower part of the engine compartment. This is the most common cause of the illuminations If the oil change light is constantly on, it means the oil level is below the recommended level. You can check the oil level by checking the dipstick at the oil drain plug. If the dipstick is dry, you will need to top up the oil. You need to check your owner’s manual to find out how much oil you should add

Ford Transit oil change light reset?

If you wish to reset the oil change light on your Ford Transit, you can press and hold the reset button on the engine cover for about 10 seconds. This will erase the codes. The issue will not be fixed permanently until you have the oil change light replaced.

How to reset oil change light on ford transit ?

If the switch inside the cabin of your transit is not working, you may need to check for a wiring issue. If you find and replace a bad connection, the light should return to normal. Check and replace the light bulb if the light is not working. If the light is flickering, it may be damaged and will need to be replaced.

How to reset my oil change light on a for

Here are the Ford Transit oil change light and reset procedure for your vehicle. If your ford transit car’s oil change light is flashing, it means that the oil change is already done. Just check whether the dipstick is clean and dry and refit it. If the oil change light is still on, it could be an indication of a bad sensor or a loose harness. You can reset the oil change light or check the sensor and harness by following the steps below.