How to safely take apart a PS4 controller?

Don’t take any parts apart unless you know for sure you can do it safely (see below). If you do, you should use common sense and only take off the parts you need to. If you’re not sure of your skills or the potential consequences of the move, leave the job to an expert.

How to take apart a PScontroller without breaking anything?

If you’re looking to take apart a PlayStation 4 controller but don’t want to risk damaging it, then you’re in luck! Most controllers are not that complicated to dismantle A quick search on the internet will show you several step-by-step instructions on how to do it. If you’re worried about damaging the buttons, most people recommend taking it apart when the batteries are empty or almost empty. However, this is not always possible, especially if the batteries

How to take apart a PScontroller without damaging it?

First, turn off the system you want to take apart. Disconnect the power and the data cables. Set the two joysticks in their neutral positions and press the L1 and R1 buttons at the same time. You should hear a click sound, which confirms that the system has been put into sleep mode. Now, take off the plastic cover that protects the joysticks. Set the left and right triggers in their positions closer to the front, so you can easily press them down. Then,

How to take apart a Playstation controller?

The Playstation controller is well-known for the buttons and joysticks, which are all very easy to press by accident. If you’ve been using your PlayStation for a while, you’re likely to have dislodged one or two of the small screws holding it together. Fortunately, it’s easy to safely dismantle the controller. We’ll cover how to take apart a PlayStation 4 controller from the inside out, to make sure that nothing gets damaged and everything can be

How to take apart a PScontroller without damage?

The easiest way to safely remove the PScontroller’s components is to start with the biggest, most obvious piece: the main plastic shell. It’s usually held on with few screws that can be quickly removed by hand. Once the plastic shell is off, carefully remove the two joysticks and the two paddles from the inside. You can use a small screwdriver to do this. Once that’s done, you can remove the two triggers. To do this,