How to set a Honeywell thermostat to permanent hold?

You must press the hold button before you set the temperature. Then you can set the temperature and press confirm to automatically set the thermostat to the temperature you’ve set. If you just want to set the thermostat to permanent hold, you can press the hold button and then set the temperature.

What to do to set a Honeywell permanent hold?

Once you have set your thermostat to permanent hold, you will want to confirm that it is working properly. The best way to do this is to check the temperature in your home every time you enter. If the temperature is not where you want it to be, check the thermostat and make sure it is set to the proper temperature. If it is not, you will need to replace it.

How to turn off a Honeywell permanent hold?

If you want to disable the permanent hold status, you can do it in the thermostat’s Settings menu. To do this, press and hold the Set button until the menu appears, then scroll down to the Set Temporary hold section. If you want to disable the permanent hold setting for all zones at once, press and hold Set All until the menu appears, then scroll down to Set Temporary hold and click it.

Honeywell permanent hold settings?

There are two ways to set a Honeywell thermostat to permanent hold: You can set the time to hold the temperature when the heater, air conditioner, or fan is running, or you can set the time to hold the temperature when the heater, air conditioner, or fan is not running. If you set the time to hold when the heat or cooling is not running, you can set the time to be quite short — just a few minutes, for example.

Honeywell permanent hold to keep warm?

If you want to have a permanent hold on the heat setting, it’s going to take more than simply setting the temperature to the highest number. There are several factors that will determine how much longer the thermostat will stay at the highest temperature. If you’ve recently had a lot of visitors and used the heating system a lot, there may be residual heat that needs to be eliminated before the thermostat will reach the highest temperature setting. There may also be a delay between