How to set up victor original mousetrap?

The Victor brand offers a very nice price for their product. But you will need to do a little work to get the best out of it. Firstly, you need to use a mousetrap that is compatible with the V-shaped spring. This means that you will need to set up the mouse trap so that the V-shaped portion is pointing towards the wall. This will allow your mouse to be trapped once it runs into the wall.

How to set up original victor mousetrap?

Firstly, pull out the batteries and set them aside. Now, take off the spring and place it onto the metal base plate. Use the screwdriver to tighten the screw all the way, securing the spring into place. Then, plug the power cord into the power source, and place the mousetrap onto the floor, positioning it in the area that you want to catch the mouse. The mousetrap is now ready to use!

How to set up victor original mousetrap remote?

The most common type of remote mousetrap is the one that operates from up to 25 feet away using a small infrared emitter that the mouse needs to pick up to trigger the trap. It’s pretty easy to set up and use. Just plug the power cable into a wall outlet and plug the mousetrap into the outlet. Once it’s set up, place the remote somewhere out of the way and give the mouse a chance to run around. You can set

How to set up original victor mousetrap trap?

For the installation of the original victor mousetrap, you will need the following: Screwdriver or pliers, screwdriver bit, screwdriver, screwdriver handle, flat-blade screwdriver, ratchet and hex wrenches, tweezers, and pliers. Start by screwing the spring into the trap body in the middle until the jaws are properly aligned. Make sure not to over-tighten the spring. Set the screwdriver handle on top of the screwdriver.

How to set up victor How to set up original victor mousetrap?

Once you have the right parts, you’ll need to connect them into the system. You will need to connect the power cable to the mousetrap, and connect the sensor to the “off” switch. Connect the trigger to the “on” switch. When you set up the mousetrap, always keep the wires and components clean and secure. If you need to make an electrical connection, use a crimping tool.