How to set victor mousetrap with plastic pedal?

The plastic pedal of the Victor mousetrap is rather small and compact. This is good because it allows the mousetrap to fit into small areas. The plastic pedal is also very simple. It consists of only one part and is easy to set up. One downside to the plastic pedal is that it does not come with a locking mechanism. This is not a problem for the standard Victor mousetrap with the metal spring. But it can be an issue if you want to use

How to set victor mousetrap with

The Victor mousetrap is a spring-loaded, plastic-encased mousetrap, which is designed to catch and hold a mouse. This humane mouse trap is very easy to set up. It also comes with a replaceable mousetrap. You can replace the trap after a few weeks, should the need arise. It is lightweight and compact and comes with four legs. The legs are designed to prevent the mouse from escaping the trap. However, it is not impossible for a

How to set victor mousetrap with plastic lever?

The plastic lever is connected to the bait, and the metal part is connected to the spring. The plastic part has a hole at each end. The metal part has a square shape. The plastic lever is fixed to the side of the plastic body. When the metal part is pulled away, the spring is released, allowing the bait to fall.

How to set victor mousetrap with plastic trigger?

The plastic pedal on the bottom of the Victor mousetrap is designed to give the mousetrap added responsiveness. After all, you don’t want to waste precious time searching for the right spot to set down the next victim. When you set the mousetrap, simply press down on the plastic pedal, and the trap will spring. This is meant to help you quickly dispatch of any small rodents that might be lurking about.

How to set victor mousetrap with plastic catch?

The plastic catch is basically the deathtrap of the mousetrap. This component connects the movement of the spring to the mousetrap itself. To set the plastic catch, you need to make sure that the spring is properly adjusted. Drop the metal ball into the hole in the catch and press it down towards the catch. This will make the ball in contact with the spring. Then, press the trigger to lock the ball into place. If there are any obstructions in the spring,