How to sew a hole in t shirt?

You can use the sewing machine to make a hole in the right place of your t shirt. It's easier than you might think. You just need to understand the right setting for your machine and how to properly guide the t shirt fabric through the machine. Typically, the settings for sewing a t shirt hole are the same as those for sewing on a patch.

How to make a button hole on a t shirt?

The next thing you want to do is mark the size and location of the button hole on the t shirt and cut it out. You want to measure and mark the location of the hole as accurately as possible to avoid having the button ends poking through the fabric. Use a tape measure or ruler to mark the spot. Now cut away the excess fabric around the hole using the hole cutter. If the shirt is thick, you will want to snip away the excess fabric several times until you have the right

How to sew a round button hole on a t shirt?

Sewing a round button hole is a simple task. The first thing you will need to do is lay the shirt flat. The t shirt will need to be a little longer on the sides to accommodate the button. Once you have the shirt laid out, measure and mark where you would like the button hole to end. This is where your sewing machine will place the end of your thread.

How to sew a hole in a t shirt jersey?

Sewing a hole in a t shirt jersey is the most common way to alter one of these items. T-shirts are made of a sturdy fabric and will hold up well to being cut and sewn. But make sure the t shirt still has plenty of life left before you attempt this project; it’s a good idea to buy a few extra whenever you spot a good deal.

How to sew a button hole on a t shirt?

If you'd like to add a button hole to a t shirt, you can use the thread to attach a simple hook to the end of your thread. Make sure the hook isn’t too long or it will ruin the shape of the hole. Then, thread the hook through the hole in your t shirt and secure it in place. If the hole is small, you may be able to tie a knot in the end of the thread. If you need to add another step to the process