How to sew a shirt collar step by step?

Once you’ve cut off all the excess fabric from the two pieces of your collar you’ll need to flip the collar over and align the two pieces in the middle. Pin the two pieces together, right sides facing out. Sew the two pieces together along the edges using a 1/2" seam allowance. Now flip the collar over again so that the right sides are facing up. If you’re using a fabric with some stretch, you can press the two pieces together to

How to sew a shirt collar by machine stitch?

You can sew a shirt collar with your machine using a zigzag or other simple stitch. Set your machine to the appropriate stitch length and width. Run the edge of your fabric under the presser foot so it’s flat. Begin sewing on the collar, lining up the raw edges with the top of the shirt. When you reach the corners, stop and enter the stitch settings. Use a small zigzag to create a decorative appearance.

How to sew on a shirt collar stitch by stitch?

The thread color you choose for your collar stitching will depend on the color of your shirt. Generally speaking, a darker fabric will look best with black thread, or a lighter shirt with a matching thread color. If you want to be absolutely sure, ask your local shop if they have a sample of your shirt color.

How to sew on a shirt collar step by step?

Using a tape measure, measure from the middle of where the collar will point to the center of your chest. Add about an inch to that length. This will be the length of the collar you need. Add one more inch around the inside of the collar. This will give you enough material to allow for a good fit.

How to sew on a shirt collar without stitch?

A shirt collar can be fastened by hand using a few simple techniques. First, use a tape measure to find the length of your collar’s neckline. Measure the length of the collar, but add an extra 1/2 inch to each end to make sure the ends of the collar will overlap. To add extra length, fold up the end of the tape measure and secure it with a scotch tape. Pin your collar to your shirt and match the center of the tape to