How to stain a cedar fence with a sprayer?

There are several ways to apply a stain to a cedar fence. One of the easiest ways is to use a pressure sprayer. A pressure sprayer is much like a paint sprayer, but instead of pressurized air, this type of stainer uses carbon dioxide or nitrogen gas. This method gives the stain a deeper penetration and a more even color.

How to stain cedar fence with a sprayer step by step?

For an even coverage, use a high-quality, penetrating exterior stain that is designed to penetrate deep into the wood. It’s important to use the right amount of product, too. Add a little bit at a time to a plastic bucket or barrel and stir it with a stick or paddle. You want to use the same amount of stain on both sides of your fence If you have a large area to cover, use a can to help you get a good, even application.

How to stain cedar fence with a sprayer and stain mix?

When applying cedar fence stains with a power or hand held sprayer there are a few things to consider. First, always wear protective gear including a dust mask, protective eyewear, and clothing. Spray on the fence from about 12 inches away and use light to moderate pressure. Test your fence for sun fading and staining before you apply any product.

How to stain cedar lattice with a sprayer?

Lattice wood can be stained a variety of ways. The best way to accomplish this is by using a high-quality deck stain. You will want to use a deck stain with an oil-based base. These types of stains will give you a rich, even color on the fence. To get an even color on the fence, you will want to use a wire brush to remove any dirt or debris from the surface. Using a sandblaster or wet sand will not work as well to

How to stain cedar lattice with a

Lattice is part of many cedar fence designs and adds an interesting texture to the fence. If you have a cedar fence with a lot of horizontal wood framing, you’ll want to avoid staining this part of your fence. If you have a cedar fence with only vertical framing, you can use a hose to apply a light coating of water to the fence and then use a can of stain to cover the entire fence.